1) A basic set of wrenches and screwdrivers, Scissors or razor knife, Marking pen, Drill & Drill Bits, Saber Saw with metal cutting blades, Files, Cleaner, Paint, Clamps, a Vice and welder if you have one

2) Material for the box. Either Aluminum or Steel. I used 1/8" aluminum Sheet.

3) Cardboard or similar material to make the pattern

4) Tubing to connect the MAF sensor to the intake manifold.

5) Rubber weather stripping material to seal box to the hood

6) New Cone Air Filter. I used K&N.