The tools and supplies you will need to do the MBA script install are:

1. Nylon fishing line 18 to 24 inches long

2. Roll of 1-1/2" masking tape. 3/4" inch will work but the wider size holds  a straight line better

3. Tape measure to check the location of the stock script.

4.  Glue remover to take off the residual glue from the stock script.

5. Wax and grease remover to clean the fender panel before installing the new script.

6. Clean soft rags to wipe off the glue and cleaner.

7. Stool or chair to get you to the proper position to line up the new script.